CIMCO Refrigeration - Industrial Process Cooling - Cooling Tower Systems

Cooling Towers Model: FBT/IBT

Features
Cooling capacity from 30 to 730 tons in single and dual cell towers. Available in forced draft or induced draft designs.

Construction
Construction options include Galvanized Steel, Fiberglass, and Stainless Steel. Most sizes are shipped fully assembled.

Fans
Low HP, axial and centrifugal fans. Quiet, low speed operation. TEAO and TEFC fan motors designed and fabricated specifically for evaporative cooling service.

Water Distribution Systems
Large orifice, non clog plastic nozzles. Single inlet with pre-strainers. Easy installation and minimum maintenance.

Wet Deck Surface
PVC surface tolerates up to 130ºF. Resistant to rot, decay, fungus, and biological attack. Designed for maximum water- to-air heat transfer.

Air Inlet Louvers and Drift Eliminators
FRP construction. Minimum air resistance prevents water splash-out. Three distinct changes in air direction to strip entrained moisture

Benefits
Reliable year-round operation. Exclusive CTI performance certification. Five-year mechanical equipment warranty.

Electrical
Standard 460/575 Volt, 3 Phase, 60HZ. Others available on request.

Options
Ladder, safety cage, platform and hand rail. Vibration switch. Dual fan motor systems. Water treatment systems. Basin heaters. Sump connections, make-up, fill, and overflow. Engineered towers of varying sizes for custom demands.

Model		FBT-30	FBT-40	FBT-50	FBT-65	FBT-80	FBT-95	FBT-115	FBT-125	FBT-135
Cooling Capacity	Tons	30	39	50	65	80	95	115	125	135
Fans	No.xhp	1x3	1x5	1x3	1x7.5	1x10	1x10	1x15	1x20	1x20
Flow	USgpm	90	117	150	195	240	285	345	375	405
Connections	Inches In/Out	(1) 3 (1) 4	(1) 3 (1) 4	(1) 4 (1) 6	(1) 4 (1) 6	(1) 6 (1) 8	(1) 6 (1) 8	(1) 6 (1) 8	(1) 6 (1) 8	(1) 6 (1) 8
Dimensions (LxWxH)	Inches	88x50x80	88x50x98	135x50x80	135x50x80	185x50x80	185x50x98	220x50x80	220x50x80	220x50x98
Operating weight	lbs. Approx.	1800	1950	2850	2900	3850	4100	4800	4850	5200
Shipping weight	lbs. Approx.	1300	1400	1800	1900	2300	2600	2800	2890	3100
Notes:	1. Single cell models, forced draft design. 2. Capacity based on 85ºF leaving water, 78ºF entering wet bulb and 95ºF return water temperature. 3. Tower flow rate based on 3 USgpm/ton. 4. Specifications and dimension are subject to change without notice.

Model		IBT-145	IBT-160	IBT-175	IBT-200	IBT-225	IBT-250	IBT-270	IBT-325	IBT-365
Cooling Capacity	Tons	145	160	175	200	225	250	270	325	365
Fans	No.xhp	1x7.5	1x10	1x10	1x15	1x15	1x20	1x20	1x20	1x25
Flow	USgpm	435	480	525	600	675	750	810	975	1095
Connections	Inches In/Out	(1) 6 (1) 8	(1) 6 (1) 8	(1) 6 (1) 8	(1) 6 (1) 8	(1) 6 (1) 8	(1) 6 (1) 8	(1) 6 (1) 10	(1) 8 (1) 10	(1) 8 (1) 10
Dimensions (LxWxH)	Inches	144x103x129	144x103x129	144x103x145	144x103x145	144x103x177	144x103x177	144x103x193	144x148x177	144x148x193
Operating weight	lbs. Approx.	7,500	7,600	8,100	8,300	10,100	10,300	11,000	13,200	14,200
Shipping weight	lbs. Approx.	4,000	4,100	4,300	4,350	5,450	5,500	5,800	6,800	7,200
Notes:	1. Single cell models, induced draft design. 2. Capacity based on 85ºF leaving water, 78ºF entering wet bulb and 95ºF return water temperature. 3. Tower flow rate based on 3 USgpm/ton. 4. Specifications and dimension are subject to change without notice.

Model		IBT-290D	IBT-320D	IBT-350D	IBT-400D	IBT-450D	IBT-500D	IBT-540D	IBT-650D	IBT-730D
Cooling Capacity	Tons	290	320	350	400	450	500	540	650	730
Fans	No.xhp	2x7.5	2x10	2x10	2x15	2x15	2x15	2x20	2x20	2x25
Flow	USgpm	870	960	1050	1200	1350	1500	1620	1950	2190
Connections	Inches In/Out	(2) 6 (2) 8	(2) 6 (2) 8	(2) 6 (2) 8	(2) 6 (2) 8	(2) 6 (2) 8	(2) 6 (2) 8	(2) 6 (2) 10	(2) 8 (2) 10	(2) 8 (2) 10
Dimensions (LxWxH)	Inches	144x206x129	144x206x129	144x206x145	144x206x145	144x206x177	144x206x177	144x206x193	144x296x177	144x296x193
Operating weight	lbs. Approx.	15,000	15,200	16,200	16,600	20,200	20,600	22,000	26,400	28,400
Shipping weight	lbs. Approx.	8,000	8,200	8,600	8,700	10,900	11,000	11,600	13,600	14,400
Notes:	1. Dual cell models, induced draft design. 2. Capacity based on 85ºF leaving water, 78ºF entering wet bulb and 95ºF return water temperature. 3. Tower flow rate based on 3 USgpm/ton. 4. Specifications and dimension are subject to change without notice.