Language: 

Chiller Pump Reservoir Systems - Model: CS

Chiller Pump Reservoir Systems - Model: CS

Features
Service capacity from 50 to 250 tons. Available in stainless steel or mild steel, pre-engineered skid assemblies.

Pumps
Centrifugal end-suction design. Provided in stainless steel up to 300 USgpm or cast iron for higher flows.

Motors
Totally enclosed fan cooled, close-coupled to pump.

Reservoir
Available in stainless steel or epoxy-coated mild steel with welded construction. Two baffled compartments for hot and cold plus a stilling chamber for wave elimination.

Reservoir Covers
Removable all stainless steel covers supplied in sections for ease of access.

Frame
Structural steel, heavy gauge all welded tube frame.

Piping
Suction piping include shut-off valves and in-tank mitered ends. Discharge piping include check valves, flow control/ shut-off valves and pressure gauges.

Reservoir Fittings
Overflow and valved drain connections as well as low level switches or make-up assemblies complete with shut-off valves.

Insulation
Closed cell foam insulation covers the reservoir, suction and discharge piping.

Electrical
NEMA 12 control panel, factory wired. 120 volt single phase control circuit. NEMA 4 operating and fail lights. All components are UL or CSA approved. Single point electrical connection. Standard 460 / 575 Volt, 3 Phase, 60 Hz.

Options
Filtration and water treatment systems. Stand-by pump arrangements. Alarm systems with retainable memory for low flow, low pressure and high temperature. PLC for control of multiple chillers. Engineered reservoirs of varying sizes for custom demands.

pumptank_2

Model CS50P2 CS80P2 CS125P2 CS150P2 CS200P2 CS250P3 CS300P3
Cooling Capacity Tons 54 80 125 150 200 250 300
Evaporator Pump No.xhp 1 x 5 1 x 5 1 x 10 1 x 10 1 x 10 1 x 15 1 x 20
Flow @ 25psi USgpm 130 200 300 360 480 600 720
Evaporator Pump Discharge Size Inches 3 3 4 4 6 6 6
Process Pump No. x hp 1 x 10 1 x 20 1 x 30 1 x 30 1 x 40 2 x 30 2 x 40
Flow @ 60psi USgpm 260 360 600 700 900 1200 1500
Process Pump Discharge Size Inches 4 4 6 6 6 8 8
Make-up Inches 0.75 0.75 0.75 0.75 1 1 1
Overflow Inches 3 3 3 3 4 4 4
Drain Inches 1 1 1 1 1.5 1.5 1.5
Dimensions (LxWxH) Inches 72x37x55 90x49x55 98x73x55 110x73x55 120x73x80 135x85x80 158x85x80
Shipping Weight lbs. Approx. 1200 1650 2300 2450 4200 5500 6700
Operating Weight lbs. Approx 3500 5600 8350 9990 17800 23950 30250
Rated Load Amps. 575/3/60 15.6 24.6 38 38 48 70 95
460/3/60 20 31 48 48 60 88 118
230/3/60 40 62 96 96 120 176 236
Notes: 1. Specifications and dimensions are subject to change without notice.
2. Chiller flow rate based on 2.4 USgpm/ton.